Seattle PD's Bike Team Blends Static
and
Moving Techniques for Crowd Control
by Officer Mike Goetz, Seattle Police
Department
print
this story
The Seattle Police Department started
using bicycles in police work in 1987 and has employed them in a variety
of ways. It recent years, it has begun to use the bike patrol to handle crowds.
As described in the article by Don Hudson, bikes have proven to be very effective
in crowd management and crowd control. With the type of training available
through the International Police Mountain Bike Association (IPMBA), departments
can become familiar with the techniques and use the information to develop
their own bicycle mobile forces.
Given the real possibility that a bicycle rapid response team may have to
shift from crowd management to crowd control, there are several points that
must be considered before undertaking the training.
1. Will the administration permit the use the bikes in a crowd? Consider
such factors as how bikes fit into the department's overall policing strategy,
P.R. implications, and possible equipment damage.
2. What level of force does the department equate with using the bike as
a shield or impact weapon?
3. Does the administration understand that in order to be effective, bikes
may have to be used in this manner?
4. Can the department muster enough bikes and personnel to be effective in
the particular situation it faces?
Once these questions have been answered, a team can be developed and training
can commence. The Seattle Police Department has deployed its bike team in
a number of situations. The tactics and techniques described below are some
of the crowd control methods they have employed.
Bicycle use in a crowd control situation can generally be broken down into
two types, static and moving. The most effective use of bikes requires a
careful blending of both techniques.
Static Maneuvers
Static refers to using the bike in one small geographic area. The two most
common assignments are "post" and "barrier." In "post," the bike unit is
assigned to maintain a high visibility presence in a particular location,
such as one corner or an entire city block. In the "barrier (fence)" position,
the bikes are used to block, or "fence", off a street, entryway, or other
large area.
The Post technique is the simplest, but is often the most difficult to
accomplish. The squad is assigned to a high visibility patrol of a small
area. The squad is there simply to maintain order. The hard part is that
the officers must maintain a professional demeanor and project an aura of
control; they must not smoke, eat, drink, or joke around with each other
or members of the crowd. The officers are frequently deployed in pairs and
ride around the area enforcing a "no tolerance" patrol. They write tickets
and make arrests for any violations they observe. Pairs are used instead
of large groups in order to make the police presence to appear greater than
it is. The success of this is measured by the news stories that report seeing
100 bike cops when, in reality, only 30 were on the street.
The Barrier technique involves lining the bikes, front wheel to rear wheel,
across the area to be blocked or protected. The squad leader and assistant
squad leaders (ASL) are positioned behind the line. The ASLs assist with
arrest, relay line orders, and watch the crowd for thrown objects. They may
be armed with long-range, less-lethal weapons (bean bag guns, shotguns with
LTL loads, pepper ball guns) as well as large OC canisters and/or personal-sized
fire extinguishers. When forming a barrier in front of a building, is is
important that a safety zone is retained behind the line so that a crowd
surge does not force the line into a dangerous position.
The barrier can easily become a moving tactic called "mobile fencing" if
the team leader determines that the crowd needs to be moved. Upon command,
the bike team readies itself to move forward by holding the bikes by the
stem and seat post. At the order, the squad members lift their bikes to chest
level and, pressing them toward the crowd, take one step forward while ordering
the crowd to "Move Back!" The squad then resumes its original stance. The
"move" command is repeated as necessary. It is essential that the line is
held intact, as the crowd will quickly exploit any gaps.
Moving Maneuvers
Moving maneuvers include most standard crowd control movements, such as columns,
lines, diagonals, wedges, and crossbow. Each of these techniques can be used
by bike units under the right circumstances.
Columns
Most of the time, the members of the bike unit ride in a single or double
column. It is easy to move into the other positions from either type of column.
There are several ways to move from a single column to a line formation;
the option selected is dependent upon where the unit is riding and where
it is to be set up. All of them are simple in theory, but take practice to
make them look and feel smooth and professional.
The simplest method is to set a line right or left. Starting from the right
or left, the leader makes a sharp turn and rides to the point at which the
end of the line is to be established. The rest of the unit fills in the line
behind the leader. For instance, if the squad is moving down the center of
the street and a line needs to be formed, the first rider stops at the point
at which the line is desired. The remaining riders move left or right alternately
until a line is formed.
Movements from a double column are similar to those from a single column.
To move from a double column to a line, left or right, the column slows or
stops and the inside column leader makes a sharp turn and rides to the set
point with the other riders following. The outside column follows the first
column to form the complete line.
To move from a center position to a line the lead riders stop at the set
position and the right and left columns fan out to their respective sides
and pull up evenly with the lead.
Diagonals and Wedges
The line can easily be changed to a diagonal or wedge formation, either before
or after it is formed. If the diagonal is called for, the lead officer will
ride out from the column at a 45-degree rather than a 90-degree angle. The
wedge is formed by the two sides of the line dropping back from the center
to 45-degree angles as the center moves slowly forward.
The Crossbow
The Crossbow movement is used to enter the crowd in order for such purposes
as to make an arrest or render aid to an injured person or besieged officer.
This movement requires enough personnel to supply a line and an entry team.
It works well with foot officers serving as the line and bike officers performing
the entry function.
The bike squad forms a double column behind the line, far enough behind so
they can get a little speed up to perform the maneuver. On command, the line
makes a gap in the center and the bikes ride through this gap. The two lead
riders ride straight to the goal while the remainder of the squad splits
left and right, encircling them to protect them from the crowd. Once they
are in position, the cover officers dismount and use their bikes as barriers.
If the crowd becomes a threat, an application of OC spray may be used. The
lead riders make the arrest or tend to the injured person, and the squad
retreats back through the line to safety. This maneuver must be conducted
with enough speed and force to make a hole in the crowd, and completed quickly
enough that the crowd does not have time to react.
Communication and practice are the keys to the success of all maneuvers.
Every formation and maneuver must be ordered by the team leader. During an
event that requires the use of more than one bike squad, it is important
to ensure that each squad follows the correct leader. The simplest way to
accomplish this is to assign a number (1, 2, 3...) to each bike squad. The
team leader puts that number of the back of his or her helmet or in another
easily visible location. The number must be placed so that it is easily seen
by the officers, but not by the crowd, which may take action against the
leader. Numbering the squads also makes it easier for the leader to signal
the members to form up with simple hand motions rather than shouting over
the crowd noise. The team leader also designates a rally point at which the
squad will meet if it is separated.
Limited Contact Uses
Although the police bike squad works extremely well with other units on the
front lines, it also works well on the periphery an incident. The speed and
mobility of the squad allow it to quickly outflank a crowd if it moves in
an undesirable direction. A squad or two of bicycles positioned several blocks
away from the action can be moved in a fraction of the time required to move
a foot squad or even a vehicle squad, as bikes are not hampered by stairs,
traffic, or a lack of roads. This mobility makes the bike squad the ideal
back-up unit for the interior officers. In addition, the strong flanking
presence provided by the bikes can discourage people on the outskirts from
joining the main group. The bike squads also function as crime suppression
units left on the periphery to deal with those who would take advantage of
the diverted attention of the other officers.
Equipment
This type of bike squad should always be equipped with everything they may
need for effective crowd management, as its effectiveness is greatly reduced
by reliance upon additional vehicles. The squad should be equipped with the
following items: gas masks, large OC spray devices, flexcuffs, first aid
kits, fire extinguishers, and a long, lockable cable. If it appears as if
the squad will be on the street for an extended period of time, it may be
appropriate to equip a support vehicle with complete wheel and tire sets,
both front and rear; spare chains, tubes, a pump, water, and snacks. Long
sleeves and long pants are recommended for added protection, even in hot
weather, and use of arm and leg padding may be appropriate. Other departments
use lightweight motorcycle helmets to provide extra protection yet allow
easy use of a gas mask, personal hydration devices worn on the back, and
earbuds for the radios to ensure good communications. The list could be endless;
but regardless of the equipment carried, it is essential that the bike squad
practice with it prior to implementation.
Training
Many people outside of police bike circles still think, "oh, I know how to
ride a bike, I can do this." Use of bike squads for crowd management and
crowd control prove what the International Police Mountain Bike Association
(IPMBA) has argued for years: bike operations require specialized training
in order to ensure their effectiveness and success. Please refer to the article
by Don Hudson elsewhere in this issue for more information. Officer Hudson
has developed a 40-hour course, Bicycle Rapid Response Team training, which
debuted as a pre-conference training session on May 4-8, 2002, in conjunction
with the 12th Annual IPMBA Conference in Odgen, Utah.
Officer Mike Goetz has been a Police Officer for 25 years, the last 18
with the Seattle Police Department. He has been involved in police biking
since 1988 and is Lead Bike Instructor for the City of Seattle. He serves
on the Board of Directors for the International Police Mountain Bike Association
(IPMBA). He is a certified Instructor Trainer, Police Cyclist Instructor,
Emergency Medical Services Cyclist Instructor, and Maintenance Officer Course
Instructor. Comments and questions can be directed to him at mgt1998@msn.com.
This article originally appeared in the April 2002 issue of Law and Order
magazine, www.lawandordermag.com.
|
